Table Top Autoclave

The Table Top Autoclave differentiates particular through their large capacity compared with their compact overall size. On the construction of these tabletop autoclaves, we took into consideration that they fit on a laboratory table. Laboratory tabletop autoclave sterilizers at the highest stage of development. Osworld Scientific Equipments Pvt. Ltd., manufactures table top autoclave with using high grade technology and supplies only superior quality machine to their customers in India as well as Worldwide.

Table Top – Front Load Autoclave


Walk In Stability Chamber Manufacturers
Features
  • Single wall design with external reservoir for steam and water
  • Fully Automatic operation, cycle begins with press of a START button
  • Initial automatic air exhaust cycle helps create partial vacuum in the chamber
  • At a preset temperature the valve automatically shuts and there after steam pressure builds up
  • An inbuilt timer which is operator programmable can be adjusted as per sterilization load requirement
  • Once sterile time period is complete the steam is automatically exhausted
  • Inner chamber is made of stainless steel
Euro Certification:

CE Certificate from International Notified body .

Specifications
Pressure Safety high pressure release valve, door auto-locked under pressure, in-built safety temp threshold
Temperature Safety high temperature cut off.
Electric Circuit Breaker
Water Level Low water level cut-off to heaters, water fill control
Calibration & Validation
  1. Temperature sensor probe calibration with traceability to ERTL, Govt Labs
  2. Temperature controller calibration with traceability to ERTL, Govt Labs
  3. IQ, OQ and PQ documentation and protocols provided with equipment
Optional Extras/Accessories
  1. Printer interface facility to record data of 1 or 3 temperature and 1 pressure location within the chamber
  2. Auto filling of water and cut-off
  3. F0 printing
  4. Oslog Data Storage Device

The Oslog Software:

In compliance with the guidelines laid down by the ICH/FDA, Osworld proudly presents the 21 CFR Part 11 Oslog Software developed exclusively for Osworld by M/s Godrej & Boyce Mfg. Co. Ltd., one of India’s most reputed and trusted brands. A number of features in this software necessitate it as a “must-have” accessory with the Osworld range of products.

OFFLINE MODE – In this mode, the Data Storage Device stores data up to 10000 readings in FIFO mode (First in First Out) and on a USB Pen Drive if connected, which can be later connected to a PC.

ONLINE MODE – In this mode, the software can directly store data into the database file in the hard drive of the PC or can be downloaded on to the PC as and when required.


Features of the Oslog Software:
  • 21 CFR Part 11 compliant software
  • Controller setting programmable
  • Audit Trail Report
  • Graphical Reports
  • Multi-level Passwords
  • Electronic signature
  • Scanner graph
  • User-friendly
osworld autoclaves
Integral Printer:

The printer provides detailed information on the actual parameters, such as:

  • Real Time
  • Program/Type of Load
  • Temperature/Pressure Set/Process Values of multi-sensors
  • Drying time
  • Cycle Time
  • Vacuum Leak Test
  • F0 printing
Class Class ‘S/N’ Class ‘B’
Model No. OAT-FL-S/N-S/G-35 OAT-FL-S/N-S/G-35 OAT-FL-S/N-S/G-52
OAT-FL-B-S/G-21 OAT-FL-B-S/G-35 OAT-FL-B-S/G-52
Temperature Range 110°C to 134°C programmable
Pressure Range 10 to 30 PSI, factory set at 15 PSI
Size of inner chamber Dia x Height (cms) 30 x 30 30 x 50 30 x 55 30 x 30 30 x 50
30 x 55
Volume (liters) 21 35 52 21 35 52
No. of trays supplied 2 2 2 2 2 2
Heat rating (kw) 1.5 2.0 3.0 1.5 2.0 3.0
Vacuum pump No No No Yes Yes Yes
Electrical 230V / 15A / 50 Hz
Temperature resolution 0.1 °C
Temperature Accuracy +0.5 °C
Pressure Resolution 1 PSI
Pressure Sensor No No No Yes Yes Yes
Drying Cycle No No No Yes Yes Yes
User defined program 2 2 2 2 2 2
Bowie Dick Test No No No Yes Yes Yes
Vacuum leak test Program
No No No Yes Yes Yes

 

PLC System :

Our PLC are compact in size and perform exceptionally due to their high capacity for program planning and their ability to work with various function extension modules.


Features of the PLC System include:
  • Strong in-built communication functions and handy communication instructions
  • No extra communication modules required
  • Ability to construct a complete control network with all industrial automation products
Download Brochure